give a look to the mounting suggestion in the manual
http://manual.spirit-system.com/index.p ... k_Mounting
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Gps Holder for My Oxy3 https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3726 |
Page 1 of 1 |
| Author: | Pino74 [ Sat 18. Jan 2020 14:33:45 ] |
| Post subject: | Gps Holder for My Oxy3 |
Hello I would like to buy a gps module, for now I think I will use it on Oxy 3, which has a tube/tail diameter of 12 mm. Which support / holder should I use for the gps queued on my oxy 3? Thanks |
|
| Author: | ZeXx86 [ Sat 18. Jan 2020 14:44:28 ] |
| Post subject: | Re: Gps Holder for My Oxy3 |
Hello, it will hold without a holder. Supplied double sided tape might be enough. Holder adds weight too what is not good for small helicopters. |
|
| Author: | Pino74 [ Sat 18. Jan 2020 14:56:45 ] |
| Post subject: | Re: Gps Holder for My Oxy3 |
Thanks for your answer, Tomas! but I have doubts if the little contact surface(tube/tail)(because it is not an extended flat surface) is a good solution for double side tape....and the gps case...in the end I would only use 1/3 of the entire surface of the gps cover, with the double side tape on my tube/ tail. It seems to me an approximate solution . of course the holder weighs and you're right. |
|
| Author: | urgno [ Sat 18. Jan 2020 15:01:47 ] |
| Post subject: | Re: Gps Holder for My Oxy3 |
give a look to the mounting suggestion in the manual http://manual.spirit-system.com/index.p ... k_Mounting |
|
| Author: | Pino74 [ Sat 18. Jan 2020 15:10:21 ] |
| Post subject: | Re: Gps Holder for My Oxy3 |
Hello Urgno, mine is just a test montage on the Oxy3 then I will take it on a 700 class, but I still want a fixed support for the gps. I have to manage somehow Thanks |
|
| Author: | LogoX2 [ Sat 18. Jan 2020 22:29:47 ] |
| Post subject: | Re: Gps Holder for My Oxy3 |
use the supplied tape it will be fine. I use this method on both Oxy 3 & 4 with no issues. |
|
| Author: | Pino74 [ Sun 19. Jan 2020 16:00:10 ] | ||
| Post subject: | Re: Gps Holder for My Oxy3 | ||
Hi LogoX2 Today I bought my first spirit GPS module. As soon as it arrives I ask you for help and impressions. Thanks
|
|||
| Author: | urgno [ Wed 22. Jan 2020 8:55:26 ] |
| Post subject: | Re: Gps Holder for My Oxy3 |
if you have a friend that can 3d print for you here you find a lot of supports: https://www.thingiverse.com/search?q=geolink |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|