Setting up Spirit/Spektrum integration using Spirit Pro, HW V4 and 4649T.
In addition to the 4649T, I want to have two satellites, but the primary sat port on Spirit is taken up by the Telem UNI Cable from the ESC, leaving only the secondary sat port.
On Spirit store, I see the Multi Adapter Cable, and the instructions seem to suggest that it can be used with the 4549T.
HOWEVER... The 4649T plugs in to the JETI integration cable, which then plugs into the Ele/Pit/Ail and Rud ports on the Spirit Pro. But the Spirit online manual shows the Multi Adapter Cable plugged into those same two ports.
What am I missing
---------------------------------------------------
Edit: Looks like it's already been asked and answered here:
viewtopic.php?f=20&t=3070&hilit=multi+adapter
Thanks