Spirit System https://www.spirit-system.com/phpBB3/ |
|
No ESC telemetry, but I do get FrSky S-Port temelemtry https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3624 |
Page 1 of 1 |
Author: | xoexoe [ Mon 28. Oct 2019 6:40:46 ] |
Post subject: | No ESC telemetry, but I do get FrSky S-Port temelemtry |
Spirit 2 R-XSR via SBUS FrSky Horus X10S OpenTX 2.2.4 (I think) Hobbywing 60A V4 I am unable to get any ESC telemetry data on my Horus X10S even after trying Discover New Sensors. But I do get telemetry of my FrSky S-Port mini voltage LiPo cell sensor so something seems to be working. I also cannot get integration working. I have integration working with Lua on my other Spirit setups, so I know my TX is set up correctly for that. Under Telemetry Settings in Spirit setup I have selected Hobbywing V4. I have a direct connection from my HW 60A programming port to my Spirit 2’s SAT 1 port, but with the red power wire removed. I am not using a telemetry UNI cable. I’ve done this on Spirit 1 and uSpirit no problem (direct connection with red wire removed). I don’t think this is the issue because integration isn’t working either. Also tried the SAT 2 port of the Spirit 2 but that didn’t work. I have the FrSky integration cable between the SYS port of the Spirit 2 and the S-Port of my R-XSR. The longer side of the integration cable goes to the SYS port. Any ideas on what to try next?? |
Author: | xoexoe [ Mon 28. Oct 2019 7:15:07 ] |
Post subject: | Re: No ESC telemetry, but I do get FrSky S-Port temelemtry |
Ugh Nevermind. Figured it out. User error. My integration cable was not actually connected as I described it above. It was backward. |
Author: | ZeXx86 [ Tue 29. Oct 2019 15:36:34 ] |
Post subject: | Re: No ESC telemetry, but I do get FrSky S-Port temelemtry |
Great, thank you for the message! |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |