| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Spirit,AR 7700-SRXL / SUMD https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3581 |
Page 1 of 1 |
| Author: | Börni1 [ Wed 25. Sep 2019 19:09:59 ] |
| Post subject: | Spirit,AR 7700-SRXL / SUMD |
Hello, Spirit wants to work with the Spektrum ar 7700 receiver. In the manual, the Spirit Pro receiver SRXL / SUMD Because of the increased power consumption, it is recommended to use a dual-current cable. It should be connected to the AUX interface. Where should I take the power for the second line and is with the AUX interface what in spirit meant? Thank thanks Börni 1 |
|
| Author: | ZeXx86 [ Thu 26. Sep 2019 21:09:12 ] |
| Post subject: | Re: Spirit,AR 7700-SRXL / SUMD |
Hello, if your helicopter is 500 class or bigger then two BEC leads are recommended. Usually ESCs are equipped with throttle + secondary BEC lead. So you can just plug both to the receiver. And then two leads can go to the unit. |
|
| Author: | Börni1 [ Thu 26. Sep 2019 22:29:49 ] |
| Post subject: | Re: Spirit,AR 7700-SRXL / SUMD |
Hello ZeXx86. Thank you for your prompt reply. What I do not understand yet, they write: And then two wires can go to the device. Do you mean two lines from the receiver to the spirit? Or is the SRXL management enough for the spirit? With best thanks Börni 1 |
|
| Author: | ZeXx86 [ Fri 27. Sep 2019 12:13:32 ] |
| Post subject: | Re: Spirit,AR 7700-SRXL / SUMD |
One cable should be enough if helicopter is 380 class or smaller. Unfortunately I dont know any detail about your model. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|