| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| AR8010 and sxrl https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3558 |
Page 1 of 1 |
| Author: | Stanley1 [ Sat 07. Sep 2019 9:56:49 ] |
| Post subject: | AR8010 and sxrl |
Hi all New guy here with an issue Setting up my 700x with an ar8010t and spirit pro using the sxrl connection When I run through the set up and get to the servo screen with the green bars the only thing I can get moving is the right and left aileron servos but with the rudder stick??? Nothing else moves on the heli and no other green bar moves except for aileron going from -50 to +50 Any ideas? |
|
| Author: | ZeXx86 [ Mon 09. Sep 2019 13:16:53 ] |
| Post subject: | Re: AR8010 and sxrl |
Hi Stanley, please make sure you have SRXL/SUMD configured in the Receiver type parameter. Then you can check the Channels, there you have to see Channels 2 to 6 from up to bottom. Possibly you can assign Throttle to Channel 1 too. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|