| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| reduce shaking at low rpm goblin 570 https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3414 |
Page 1 of 1 |
| Author: | cc1975 [ Tue 23. Jul 2019 12:42:06 ] |
| Post subject: | reduce shaking at low rpm goblin 570 |
Hey, i want to fly my Goblin 570 also with low RPM. If i fly with 2100 or 2600 RPM all ok, but if i go to 1800RPM or lower i have shaking on the whole swashplate, mostly on Elevator. Setup is Standard for G 570, Gain on Swashplate is About 50. Anyone some Idea or same Problem? Greetings Christian |
|
| Author: | thestructured [ Thu 25. Jul 2019 17:41:34 ] |
| Post subject: | Re: reduce shaking at low rpm goblin 570 |
Low headspeeds will require reduced cyclic gain and the best thing you can do is have a separate bank with this reduced gain for when you want to fly low headspeeds. |
|
| Author: | ZeXx86 [ Sat 27. Jul 2019 8:12:55 ] |
| Post subject: | Re: reduce shaking at low rpm goblin 570 |
Hi, you can reduce Geometry 6° value little bit. This could help a lot. Ideally you can use a softer main blades, for example Edge FBL or similar. |
|
| Author: | cc1975 [ Sat 27. Jul 2019 15:12:33 ] |
| Post subject: | Re: reduce shaking at low rpm goblin 570 |
I have Rapid Blades, but with original SAB Blades or Zeal Blades i have the same effect. So reduce 6 Degrees geometry would be better like on 5,5 Degrees? lowering Swash gain would help also? The 6 Degrees i have to set on the blade over the tail boom Right? If i have 6 Degrees on the front blade i have 7,3 on the blade over the tail boom???? Greetings Christian |
|
| Author: | cc1975 [ Tue 06. Aug 2019 12:15:03 ] |
| Post subject: | Re: reduce shaking at low rpm goblin 570 |
I reduced Geometry from 6 to 5,5 Degrees and now the shaking is gone….. will be also interesting for my upcoming Henseleit tdsf where i will have 800rpm lowest. greetings christian |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|