| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Burnt FBL controller https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3387 |
Page 1 of 1 |
| Author: | Janch [ Fri 12. Jul 2019 8:25:05 ] |
| Post subject: | Burnt FBL controller |
After a weird crash (suddenly got full negative pitch, could be damaged wiring isolation) I think I destroyed my Spirit Pro controller by accidentally connecting power to sys port or something. Now the FBL is unresponsive, the LED doesn't light up and the controller itself is drawing ~1 amper. Tried to replace the on-board LDO but it didn't help. Tried to skip the LDO entirely by supplying 3.3V directly to the output pin of LDO. Then the LED lighted up but the ARM processor got super hot. So the ARM chip itself is burnt. 1. Is there any chance I could replace the ARM chip and get it flashed with the firmware myself? 2. Does Spirit offer some discount for a new FBL? I could ship the burnt controller back if needed. I bought the Spirit Pro from the e-shop on 18.07.2017. |
|
| Author: | karlmort [ Sat 13. Jul 2019 18:13:35 ] |
| Post subject: | Re: Burnt FBL controller |
Hi. FYI I have burned up 2 by accident. Both sent back for repair. If I remember right, the repair was 30usd pr unit, including shipping. Turn back time was 5 days... Best regards Karl Morten Sent from my iPhone using Tapatalk |
|
| Author: | ZeXx86 [ Sun 14. Jul 2019 8:35:38 ] |
| Post subject: | Re: Burnt FBL controller |
1. no there is no chance. 2. yes, but repair is much cheaper. Please ship the unit to us. It can be repaired in one day. If you are living outside of EU please declare package value under 25 USD. This is very important. |
|
| Author: | tmaster77 [ Wed 17. Jul 2019 16:40:43 ] |
| Post subject: | Re: Burnt FBL controller |
best customer service ever. better than all other brands of fbl units in the market really. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|