| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Geolink update https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3346 |
Page 1 of 1 |
| Author: | st3ntor [ Fri 07. Jun 2019 12:05:12 ] |
| Post subject: | Geolink update |
I've been having a problem just like everybody else did that I can't update my geolink unit. The unit just arrived this morning. And I accidentally update it with 1.0.2 eventhough it's already got the same version (damn it). When it was updating, the spirit software froze, so I had to restart it. And the geolink isn't functioning at all. I managed to upload 1.0.2 to geolink with recovery mode with a really quick connect and disconnect method (I have regular heli red spirit by the way), but when it reaches 100% the status says failed and the failed pop up window message comes up and the spirit software froze. I'm sad now, coz I was looking forward to fly my heli tomorrow with this geolink unit. What should I do? I'm in new zealand by the way, bought the unit from local distributor |
|
| Author: | LogoX2 [ Fri 07. Jun 2019 23:44:37 ] |
| Post subject: | Re: Geolink update |
I had the same problem. If you have access to a Spirit Pro connect the Geo Link to it and Flash 1.0.2 Firmware. |
|
| Author: | st3ntor [ Sun 09. Jun 2019 14:17:51 ] |
| Post subject: | Re: Geolink update |
LogoX2 wrote: I had the same problem. If you have access to a Spirit Pro connect the Geo Link to it and Flash 1.0.2 Firmware. I managed to fix it. I had to downgrade the spirit firmware to 2.5.2 and reflash the geolink. But it's very tricky. Coz I had to plug and unplugged the cable very very very very quickly on recovery mode. And it didn't always work every time. 1 out of 5 attempts |
|
| Author: | ZeXx86 [ Mon 10. Jun 2019 8:17:07 ] |
| Post subject: | Re: Geolink update |
Hi, yes, connecting must be relatively quick. It is the best to just re-connect the cable from the GeoLink. Then it should be basically always successfull. |
|
| Author: | buttles [ Mon 10. Jun 2019 10:25:15 ] |
| Post subject: | Re: Geolink update |
Hi Tomas, it's looking like you may have to tweak the Standard Spirit unit to accept the firmware reset as I also had to use a Pro to unbrick a Geolink. You just can't unplug and reinsert a small jst quickly enough!! Still a great product. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|