Spirit System
https://www.spirit-system.com/phpBB3/

geolink satelite calibration
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3219
Page 1 of 1

Author:  Karl1081 [ Mon 18. Mar 2019 22:16:21 ]
Post subject:  geolink satelite calibration

im all set up with my geolink , im at the request calibration stage. i get the rapid flashing lights at power up and when starting to paint the imaginary sphere ,i do get blue flashing led,s as the unit is locating the satelites , however it never completes and ive yet to get the solid blue light once its successfully calibrated . as i understand it , the geolink will not operate now until this calibration is completed .
im trying to do this outside of my house and tried indoors but no luck yet , am i better to try at my flying field ?

Author:  FrankFuss [ Tue 19. Mar 2019 4:47:57 ]
Post subject:  Re: geolink satelite calibration

Here is a video that might help. You will see the LED continuously flashing when done.

https://youtu.be/skH0u2yV6_M

Author:  Karl1081 [ Tue 19. Mar 2019 7:11:28 ]
Post subject:  Re: geolink satelite calibration

FrankFuss wrote:
Here is a video that might help. You will see the LED continuously flashing when done.

https://youtu.be/skH0u2yV6_M


hi frank
ive done exactly s your video , in fact i saw your video awhile ago and so followed it . i must have done this a dozen times now but i never get the completion blue led light .
ill try in a more open space ,see if i get a better result
thanks
karl

Author:  mb-1953 [ Tue 19. Mar 2019 13:32:14 ]
Post subject:  Re: geolink satelite calibration

When complete the blue light flashes rhythmically. It is never solid on.

Author:  Karl1081 [ Wed 20. Mar 2019 20:40:50 ]
Post subject:  Re: geolink satelite calibration

mb-1953 wrote:
When complete the blue light flashes rhythmically. It is never solid on.

Author:  Karl1081 [ Thu 21. Mar 2019 7:11:01 ]
Post subject:  Re: geolink satelite calibration

Karl1081 wrote:
mb-1953 wrote:
When complete the blue light flashes rhythmically. It is never solid on.


all sorted now , but it wasnt until i removed the geolink from its mount and carried out the calibration with it in my hand ,that it worked .
i highly recomend other people do this method as when its attached to the heli ,youll be trying many many times to get that blinking blue light .
painting this imaginary sphere may work for some people , but turning in the hand for me is alot better

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/