| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Futaba gv-1 governor senser https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3193 |
Page 1 of 1 |
| Author: | leatherface [ Tue 05. Mar 2019 2:23:10 ] |
| Post subject: | Futaba gv-1 governor senser |
Hi, does the GV-1 sensor work with spirit? And also via satellite port or normal connection? Thankyou. |
|
| Author: | ZeXx86 [ Tue 05. Mar 2019 9:09:39 ] |
| Post subject: | Re: Futaba gv-1 governor senser |
Hi, yes, it is working. Powering lead should be connected to a BEC, so not the Spektrum connector. But since it is important to set a proper distance from the backplate we recommend to use a Hall sensor such as one from Align, BeastX or Spartan that is sensing magnets. |
|
| Author: | leatherface [ Tue 05. Mar 2019 9:23:16 ] |
| Post subject: | Re: Futaba gv-1 governor senser |
ok,thankyou.it came with a second hand n7.i have an align governor sensor,i will use that. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|