|
It is currently Mon 25. Nov 2024 5:51:21
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 5 posts ] |
|
| Author |
Message |
|
eric303
|
 Posted: Tue 05. Mar 2019 5:07:34 |
|
Joined: Thu 21. Feb 2019 20:34:53
Posts: 4
|
|
I am having issues trying to set the max head speed below 1500rpm...I am trying to set it too 1200rpm for low headspeed.
The motor I have is a Scorpion HK-II-4525-520kv. Sensing Divide set to 5. Gear radio 11.9. Speed controller is Hobbywing 200A V4.1. Throttle range Min 1000us max 1900us. Also any recommendations for the throttle curve to get started? I have a JETI-DS16.
|
|
| Top |
|
 |
|
ryguy76
|
Posted: Tue 05. Mar 2019 5:15:45 |
|
Joined: Wed 01. Mar 2017 23:39:31
Posts: 59
|
|
Your Max can stay at 1500rpm. From there, set your throttle curves in radio to give you 1200rpm.
1200/1500 = 0.8.
80% TC should give you 1200rpm.
Sent from my iPhone using Tapatalk
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Tue 05. Mar 2019 8:49:55 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Correct, you should use flat throttle curve at 80% to get 1200 RPM.
You can verify it by looking at the Governor window. There you can see Requested RPM if you will disarm the Throttle Hold for a short period of time.
_________________
Spirit System developer
|
|
| Top |
|
|
|
eric303
|
Posted: Wed 06. Mar 2019 5:41:13 |
|
Joined: Thu 21. Feb 2019 20:34:53
Posts: 4
|
|
Thanks for the info. I set curve to 80%...During bench testing with no blades it reached 1000rpm and the RPM sensor test signal was flashing from active to inactive rapidly...is this due to the lack of load?
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Wed 06. Mar 2019 7:59:00 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Yes, when there is no load it might not reach the requested RPM precisely.
_________________
Spirit System developer
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 48 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
