| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Frsky Taranis and X8R https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=315 |
Page 1 of 1 |
| Author: | Gadorey [ Sun 02. Nov 2014 14:13:33 ] |
| Post subject: | Frsky Taranis and X8R |
I just got a spirit for my Trex 500 DFC and I'm not sure how to choose the Receiver type. My receiver is a Frsky X8R bound to my Taranis. Can I choose PPM and connect the Sbus Port on the X8R to the RUD port on the Spirit? Or do I choose PWM, and how do I connect the Rx to the Spirit? Or are both choices wrong and I have to select something else? Many thanks in advance for your help. Cheers |
|
| Author: | ZeXx86 [ Sun 02. Nov 2014 14:32:18 ] |
| Post subject: | Re: Frsky Taranis and X8R |
Hi For the classic receiver connection you can use PWM. For S-Bus connection (with S-Bus invertor) you can select Futaba S-Bus. |
|
| Author: | Gadorey [ Sun 02. Nov 2014 14:42:36 ] |
| Post subject: | Re: Frsky Taranis and X8R |
ZeXx86 wrote: Hi For the classic receiver connection you can use PWM. For S-Bus connection (with S-Bus invertor) you can select Futaba S-Bus. So if I use PWM how do I make the connections between my Rx and the Spirit unit? On Taranis I have the following channel order: Ch1 is Ail Ch2 is Ele Ch3 is Thr Ch4 is Rud Ch5 is Gyro gain I suppose ch4 goes into the RUD port on the Spirit and Ch5 into Aux. But what about the other 3? |
|
| Author: | ZeXx86 [ Sun 02. Nov 2014 14:52:42 ] |
| Post subject: | Re: Frsky Taranis and X8R |
Correct AIL (orange) /PIT (red)/ELE (brown) should be connected with CH1/CH6/CH2. |
|
| Author: | Gadorey [ Sun 02. Nov 2014 14:57:09 ] |
| Post subject: | Re: Frsky Taranis and X8R |
Ok, got it. Thanks! I just saw the harness in the box.... |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|