| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Triggering Acceleration for T-Rex 450 pro? https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3121 |
Page 1 of 1 |
| Author: | helinut [ Wed 30. Jan 2019 5:52:25 ] |
| Post subject: | Triggering Acceleration for T-Rex 450 pro? |
Looking at Youtube, it seems many pilots are setting the GeoLink minimum altitude at 4m. What Triggering Acceleration value do you recommend as a starting point for T-Rex 450 pro? |
|
| Author: | HeliDave [ Wed 30. Jan 2019 17:41:59 ] |
| Post subject: | Re: Triggering Acceleration for T-Rex 450 pro? |
I have same question for TREX 500: Many pilots on YouTube are setting the GeoLink minimum altitude at 4m. What Triggering Acceleration value do you recommend as a starting point for T-Rex 500? |
|
| Author: | ZeXx86 [ Sat 02. Feb 2019 16:20:14 ] |
| Post subject: | Re: Triggering Acceleration for T-Rex 450 pro? |
We recommend to leave it at default value (6), but higher is always safer. When model is flying towards the ground, it will trigger the rescue faster with higher value. With low value there is chance it could be too late. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|