| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Gyro Gain Channel. https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3039 |
Page 1 of 1 |
| Author: | stewartgrant37 [ Sun 23. Dec 2018 11:18:39 ] |
| Post subject: | Gyro Gain Channel. |
I have just powered up the spirit Pro using DSM2 Satellites and a JT DSX12 transmitter. No servos or ESC connected and powered from a battery pack. I want to set up the transmitter. All the channels seem ok, showing -100 to +100% movement in the diagnostic tab with the exception of the gyro channel. The gyro channel shows 0% at the midpoint and +100 at BOTH ends of the input from the transmitter. +100 - 0 +100. Always showing head-lock. I would be grateful if someone can provide some guidance. It's probably something simple, this is the first time I have looked at one of the units. Thanks |
|
| Author: | ZeXx86 [ Mon 24. Dec 2018 11:49:45 ] |
| Post subject: | Re: Gyro Gain Channel. |
Hello, this depends on what Stabi/Function is programmed. If it is Disabled, then you will see Normal mode in -100 - 0% range. If Rescue or Stabilisation is programmed it will show rather just Head Lock as described in the tables here: http://manual.spirit-system.com/index.p ... on_vs_Gyro |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|