| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| confused for how to have momentary Rescue, plus stability https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2967 |
Page 1 of 1 |
| Author: | carl0s [ Tue 13. Nov 2018 0:40:06 ] |
| Post subject: | confused for how to have momentary Rescue, plus stability |
Hi. I am confused for how to make a momentary switch activate Rescue mode, while still having Stabi->Stabilisation enabled all the time in the bank. Do I need to make my momentary button switch banks? It doesn't make sense for the Channel assignment. This says I can assign a channel to 'Stabi Function' but where do I choose which Stabi function this channel/button will enable? and in the Stabi-> Function tab, it says 'function activated when gyro gain is negative'. OK I think I get it now. Either negative gyro gain, or switch function, will activate whatever is set in stabi tab. If I want the flight modes to switch 3 banks, as well as have a 2-position momentary switch that enabled just rescue, I suppose I need to mix the momentary switch to the flight-mode switch on the TX? |
|
| Author: | carl0s [ Tue 13. Nov 2018 1:08:17 ] |
| Post subject: | Re: confused for how to have momentary Rescue, plus stabilit |
I am struggling with this a bit. it looks like I have to use bank switching. but I can't see how to use an on/off switch to switch between banks 0/1, and have a 3-pos switch to select the banks as well. basically I want the momentary for rescue (bank 2), but also to be able to use another switch for banks 0 and 1. only option I can see is to limit the end-point of one of the switched to half way ? |
|
| Author: | carl0s [ Tue 13. Nov 2018 4:00:20 ] |
| Post subject: | Re: confused for how to have momentary Rescue, plus stabilit |
It's OK I managed it with the mixer on the TX. Thought it might be easier than that but it's all good. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|