|
It is currently Mon 25. Nov 2024 2:25:53
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 4 posts ] |
|
| Author |
Message |
|
Tfmcnellis
|
 Posted: Fri 12. Oct 2018 18:30:34 |
|
Joined: Tue 15. Sep 2015 2:49:32
Posts: 56
|
|
I have a Spirit Pro in a Goblin 380 running KST servos. I had a blade strike and had to change a servo and other parts. Now when I Initialize the Spirit the servos move differently than before. I also programmed in 2 banks after the blade strike. One for normal flight and one with stabilization and rescue to work with both. If I am in the normal flight bank the servos go to level then the aileron servo goes down once then back to level. When I initialize in the stabilization mode the the servos go to level then the Aileron servo goes up and down 3 times then to level. I have check the condition with other servos and it still occurs. Any help would be appreciated.
Thanks
Tom
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Fri 12. Oct 2018 21:33:19 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
This mean that the Spirit unit has log saved in the memory as described in the manual.
You have to just check the flight log and then the behavior will be normal.
_________________
Spirit System developer
|
|
| Top |
|
|
|
Tfmcnellis
|
Posted: Sat 13. Oct 2018 2:36:41 |
|
Joined: Tue 15. Sep 2015 2:49:32
Posts: 56
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Sat 13. Oct 2018 8:13:46 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
You are welcome.
_________________
Spirit System developer
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 17 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
