Spirit System https://www.spirit-system.com/phpBB3/ |
|
Connection to PC https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2841 |
Page 1 of 1 |
Author: | Romis [ Mon 17. Sep 2018 8:39:46 ] |
Post subject: | Connection to PC |
Can`t connect my unit - the red Spirit, to PC. Installed the newest version of software on computer, but don`t remember what version of firmware I have on the unit... what to do? |
Author: | ZeXx86 [ Mon 17. Sep 2018 9:05:57 ] |
Post subject: | Re: Connection to PC |
No problem, in that case you can just flash the latest firmware - in the Backup tab. In the Connection tab you can see what firmware is in the unit right now. |
Author: | Romis [ Mon 17. Sep 2018 9:09:24 ] |
Post subject: | Re: Connection to PC |
ZeXx86 wrote: No problem, in that case you can just flash the latest firmware - in the Backup tab. In the Connection tab you can see what firmware is in the unit right now. Software shows that it could be started only in demo mode, there is no connection from unit to PC. When installed the new software, it updated the drivers. |
Author: | ZeXx86 [ Mon 17. Sep 2018 9:15:44 ] |
Post subject: | Re: Connection to PC |
Ah. In that case it does not communicate at all with the unit. When starting the software please make sure that the unit is fully initialized - Status LED is steady on. You can review this guide: http://manual.spirit-system.com/index.p ... dows#Usage |
Author: | Romis [ Mon 17. Sep 2018 9:21:20 ] |
Post subject: | Re: Connection to PC |
Thanks! Will try again .. |
Author: | Romis [ Fri 04. Jan 2019 20:19:50 ] |
Post subject: | Re: Connection to PC |
Still can`t connect to computer - https://drive.google.com/file/d/1hfeXkmxq1PnqKu3rx_qxLYjauk2YTYXc/view?usp=sharing |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |