Thank you for the prompt reply!
Having an outdated bin file installed in the tx would certainly explain a few things
Cheers!
Update: I went back into the Jeti TX and updated the Spirit.bin file and that solved the problem.
Thanks again,
Shawn
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Spirit Pro Firmware Update+Jeti Device Explorer Problem https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2821 |
Page 1 of 1 |
| Author: | sawacs [ Tue 11. Sep 2018 7:51:58 ] |
| Post subject: | Spirit Pro Firmware Update+Jeti Device Explorer Problem |
After updating to the latest Spirit Pro firmware, I am no longer able to access the Spirit Pro settings via the device explorer within the transmitter. When I go into the Jeti Device Explorer and click on the Spirit, which I have done many many times before, the system tries to connected then refreshes the tx screen and I am back where I started which is in the device explorer with the Spirit entry showing. I can click on the Spirit but never actually get into the system to make changes. The problem began immediately after updating the Spirit Pro firmware.. Help would be most appreciated! |
|
| Author: | urgno [ Tue 11. Sep 2018 8:53:53 ] |
| Post subject: | Re: Spirit Pro Firmware Update+Jeti Device Explorer Problem |
I think you have to upgrade the spirit.bin inside the jeti trasmitter viewtopic.php?f=20&t=2768 |
|
| Author: | sawacs [ Tue 11. Sep 2018 11:21:06 ] |
| Post subject: | Re: Spirit Pro Firmware Update+Jeti Device Explorer Problem |
Thank you for the prompt reply! Having an outdated bin file installed in the tx would certainly explain a few things Cheers! Update: I went back into the Jeti TX and updated the Spirit.bin file and that solved the problem. Thanks again, Shawn |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|