Spirit System
https://www.spirit-system.com/phpBB3/

Geo Link map during installation and setup
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2771
Page 1 of 1

Author:  tabbie [ Sat 25. Aug 2018 10:13:05 ]
Post subject:  Geo Link map during installation and setup

Hi, after setup my GeoLink i went to the map page. With 10 satellites receiving, pushing home button the map shows the correct coordinates in the lower left corner but the map ist black with a coulored circle near the middle. Waiting for more then 10 minutes gives no chart picture.
When pushing ISP the map shows a chart picture about 50km away from my position. When I move the map it shows my place and a circle with other colour. I didnĀ“t find any info in the GeoLink manual. What are the colours mean and how can I see my place when pushing home button?

Author:  FrankFuss [ Sat 25. Aug 2018 19:04:22 ]
Post subject:  Re: Geo Link map during installation and setup

You need an internet connection to get Google Map data on the GeoLink maps.

Author:  tabbie [ Sun 26. Aug 2018 7:53:42 ]
Post subject:  Re: Geo Link map during installation and setup

sure, I have a running WLAN Internet connection, I receive the map when I push the ISP button but when I push home button the map stays black.

Author:  ZeXx86 [ Sun 26. Aug 2018 10:44:42 ]
Post subject:  Re: Geo Link map during installation and setup

Hi,

the ISP nor Home buttons will not get you into your current position.
The ISP will get you just close to your area. To get right Home position you have to reprogram it in the Spirit Settings or in your field (from your radio).

In the Spirit Settings just click at the Set Home and then select point which will be your new Home position.
Then by clicking the Home position it will move at this new point.

Then dont forget to save the settings and all will be ready.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/