| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Rud port y cable https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2770 |
Page 1 of 1 |
| Author: | Tfmcnellis [ Sat 25. Aug 2018 4:08:14 ] |
| Post subject: | [SOLVED] Rud port y cable |
I am connecting the SPM4649T along with the Hobbywing 80a v4 to a regular Spirit Red. I know where the 2 signal wires go but my question is that both the Esc and the SPM4649T go to the Rud port. Can I use the y cable for these two cables? Thanks! |
|
| Author: | ZeXx86 [ Sat 25. Aug 2018 8:38:11 ] |
| Post subject: | Re: Rud port y cable |
Hello, the ESC cable should be connected at the AUX port, while SPM4649T at the RUD port/AIL ail. If you want to connect secondary BEC cable, then yes, you can use Y cable and connect it at the RUD port there. There will be no issue with it. |
|
| Author: | Tfmcnellis [ Sat 25. Aug 2018 12:53:28 ] |
| Post subject: | Re: Rud port y cable |
Thanks |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|