| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] futaba telemetry https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2752 |
Page 1 of 1 |
| Author: | urgno [ Tue 21. Aug 2018 13:38:44 ] |
| Post subject: | [SOLVED] futaba telemetry |
Hello  I was looking at this link and trying to configure the spirit and the t16sz http://manual.spirit-system.com/index.p ... _Telemetry (all ok with cables) but there are some inconsistencies: > KONTRONIK as the Sensor. This will overwrite automatically next 6 slots on 16sz the sensor is called Kontronik ESC but will overwrite next 8 slots i am unable to find this telemetry variable: > EXT-VOLT [%] - Vibration level (0 - 10% is normal level) any help ? thanks 
|
|
| Author: | ZeXx86 [ Tue 21. Aug 2018 13:44:25 ] |
| Post subject: | Re: futaba telemetry |
Hello, in the latest firmware it was recently changed. Regarding sensor name it is OK, there is only difference between Futaba radios. Ext-volt shouldnt be thete anymore. We will update the manual. |
|
| Author: | urgno [ Wed 22. Aug 2018 21:13:07 ] |
| Post subject: | Re: futaba telemetry |
thanks for fast reply so is not possible to see the "Vibration level" on telemetry ? http://manual.spirit-system.com/index.p ... _telemetry |
|
| Author: | ZeXx86 [ Thu 23. Aug 2018 10:21:31 ] |
| Post subject: | Re: futaba telemetry |
Vibration level is displayed as BEC CURRENT. Please check our updated Wiki page. |
|
| Author: | urgno [ Thu 23. Aug 2018 15:28:50 ] |
| Post subject: | Re: [SOLVED] futaba telemetry |
wonderful !! thanks a lot
|
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|