| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Goblin 380 flybarless mount and Spirit pro https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2727 |
Page 1 of 1 |
| Author: | Helibelly [ Wed 15. Aug 2018 13:22:55 ] |
| Post subject: | [SOLVED] Goblin 380 flybarless mount and Spirit pro |
Hi, I was about to move my Spirit pro unit from one of my helis onto my Goblin 380. The seperate aluminium mount will have to be used, as the pro unit is too wide for the main plate when using the belt tensioner pulleys, as the mounting bolts get in the way. But the potential problem is that the aluminium mount is only 24.5 mm wide, which leaves a small overhang of the Spirit pro unit either side. I suspect this will not be a problem but wanted to check first. Thanks, Eric. |
|
| Author: | ZeXx86 [ Wed 15. Aug 2018 13:25:29 ] |
| Post subject: | Re: Goblin 380 flybarless mount and Spirit pro |
Hi, I also think it will not cause any problem. You can just use provided double sided tape and it should hold it firmly. |
|
| Author: | Helibelly [ Wed 15. Aug 2018 17:40:52 ] |
| Post subject: | Re: Goblin 380 flybarless mount and Spirit pro |
Great thanks, Eric. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|