| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Position and altitude hold https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2689 |
Page 1 of 1 |
| Author: | alchemy66 [ Mon 06. Aug 2018 16:28:03 ] |
| Post subject: | Position and altitude hold |
Is is ok and safe to take off and land with both Geolink options active? |
|
| Author: | alchemy66 [ Wed 08. Aug 2018 16:45:10 ] |
| Post subject: | Re: Position and altitude hold |
Anyone? I know the manual says dont use any geolink function unless the model is airborne but I fly in coaxial mode as I'm still learning and it would be nice to be able to take off and land in coaxial like I usually do. Has anyone tried it? Thanks. |
|
| Author: | ZeXx86 [ Wed 08. Aug 2018 16:56:47 ] |
| Post subject: | Re: Position and altitude hold |
Yes, technically it is possible. But it is recommended to turn the features on after 10-20 seconds after GeoLink has steady ON status LED. If sooner, then the model could try to move little bit off during lift off. I recommend to try first Position Hold only. And trying to lift off and land, you should try the features in air first. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|