Hi,
are you checking it in the flight, am I correct?
If no, then this is the only problem
It will not show you any good value as the ESC current sensors are not that sensitive.
When flying, it will be OK.
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| HW 100 V4 -Spirit Pro-FrSky Horus X12S-reduced Telemetry https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2672 |
Page 1 of 2 |
| Author: | scvflyer [ Sat 28. Jul 2018 19:43:09 ] |
| Post subject: | HW 100 V4 -Spirit Pro-FrSky Horus X12S-reduced Telemetry |
Hello, I would like to use HW 100 V4 Telemetry. It works for RPM, Vibrations, Main Battery Voltage, Temp1 - but not values regarding to Ampere - no current value , no consumed Capacity. Did you have any idea what's wrong with it ? HW has been updated to latest version, same at Spirit Pro and FrSky componentens thx and br siggi |
|
| Author: | Dawiev [ Sat 28. Jul 2018 20:23:57 ] |
| Post subject: | Re: HW 100 V4 -Spirit Pro-FrSky Horus X12S-reduced Telemetry |
100A V4? To my knowledge there is only a 100A V3. This doesn't have full telemetry. |
|
| Author: | scvflyer [ Sat 28. Jul 2018 20:37:36 ] |
| Post subject: | Re: HW 100 V4 -Spirit Pro-FrSky Horus X12S-reduced Telemetry |
Sorry, confusing you . It's 80A Platinum V4. |
|
| Author: | ZeXx86 [ Sat 28. Jul 2018 22:21:47 ] |
| Post subject: | Re: HW 100 V4 -Spirit Pro-FrSky Horus X12S-reduced Telemetry |
Hi, are you checking it in the flight, am I correct? If no, then this is the only problem It will not show you any good value as the ESC current sensors are not that sensitive. When flying, it will be OK. |
|
| Author: | scvflyer [ Sat 28. Jul 2018 22:32:35 ] |
| Post subject: | Re: HW 100 V4 -Spirit Pro-FrSky Horus X12S-reduced Telemetry |
He , you are right. Currently system is running at the ground only and without blades. I will check it tomorrow , coming back with feedback. thx so far and br siggi |
|
| Author: | scvflyer [ Sun 29. Jul 2018 19:10:09 ] |
| Post subject: | Re: HW 100 V4 -Spirit Pro-FrSky Horus X12S-reduced Telemetry |
Yes, you are right everything is fine in case flying with it. And - knowing this brings one question on the table. Is ESC Ampere Measurement less precise ? br Siggi |
|
| Author: | scvflyer [ Mon 06. Aug 2018 14:24:45 ] |
| Post subject: | Re: HW 100 V4 -Spirit Pro-FrSky Horus X12S-reduced Telemetry |
hello guys , coming back to my post. Another issue - RPM is fine Consumed A - seems to be less than used current A - isn't shown RB1 - Lipo V is fine fuel / Vib - no value tmp1 - is fine everything is properly configured thx and br siggi |
|
| Author: | ZeXx86 [ Mon 06. Aug 2018 15:45:53 ] |
| Post subject: | Re: HW 100 V4 -Spirit Pro-FrSky Horus X12S-reduced Telemetry |
Hello, are you sure you are checking the current after flight? Consumed Capacity can be fixed by correction factor in the Telemetry window. Vibes should be there when flying in normal flight mode. |
|
| Author: | scvflyer [ Mon 06. Aug 2018 18:14:36 ] |
| Post subject: | Re: HW 100 V4 -Spirit Pro-FrSky Horus X12S-reduced Telemetry |
No I checked current value during flight , becuase I expected as it called current value. Hint -I'm using stand FrSky OS without lua - installation. I'm wrong expecting that ? |
|
| Author: | ZeXx86 [ Tue 07. Aug 2018 19:48:34 ] |
| Post subject: | Re: HW 100 V4 -Spirit Pro-FrSky Horus X12S-reduced Telemetry |
I am afraid but there could be issues in FrOS as it is still relatively new. With OpenTX all should work correctly. Maybe you can check if there is an update for FrOS? |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|