Spirit System
https://www.spirit-system.com/phpBB3/

Cant Open integration Menù from radio(solved)
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2622		 Page 1 of 1
Author:  Pino74 [ Mon 02. Jul 2018 22:53:35 ]
Post subject:  Cant Open integration Menù from radio(solved)
Hi all


I ask for help if someone can help me to understand why when I get to the white screen of the Dx8 gen2 radio with the latest Airware 2.00 software update, I can not move the rudder to the right and the aileron to the left to enter the menu, but nothing happens.
I state that the connections to the receiver are perfect, and I can bind Radio and receiver SPM4649, I do not have the Jeti cable but I built one myself.
My current configuration is micro spirit,2.4.3 version, hobbywing 40 amp Platinium v ​​4.0, and the latter still have to connect in telemetry. From the radio when I bind, it is done in telemetry mode, and I made sure I entered the Telemetry Text gen section and esc. I am also assured of having a linear curve of gas, but the same I can not enter the menu from pic attached

Thanks all

Attachments:
Cattura.JPG
Cattura.JPG [ 26.24 KiB | Viewed 291 times ]
Author:  Pino74 [ Tue 03. Jul 2018 0:05:49 ]
Post subject:  Re: Cant Open integration Menù from radio8solved)
it was the radio frame rate, you have to set it to 11 ms and not to 22
Author:  CFerry [ Tue 10. Jul 2018 12:28:28 ]
Post subject:  Re: Cant Open integration Menù from radio(solved)
Great information to know! Glad you figured that out.
I recently changed my DX8 from 22 to 11 ms, and noticed a big improvement in the smoothness of my servos.
Chris
Author:  Pino74 [ Tue 10. Jul 2018 12:37:59 ]
Post subject:  Re: Cant Open integration Menù from radio(solved)
it pleases me, I always try to write so that it can help others.

Pino
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/