| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Help with Hobbywing SCM please ? https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2603 |
Page 1 of 1 |
| Author: | Dawiev [ Thu 21. Jun 2018 3:31:17 ] | ||
| Post subject: | Help with Hobbywing SCM please ? | ||
Hi, I need some help / guidance with the wiring to use the HW SCM module please. I'm using a Spirit Pro, SPM4649T and a HW 200A ESC. Should I connect the throttle lead through the SCM ? Should I take the +, - from the Aux port on the ESC anywhere ? Attached is the manual for the the SCM module.
|
|||
| Author: | Dawiev [ Sat 23. Jun 2018 1:40:45 ] |
| Post subject: | Re: Help with Hobbywing SCM please ? |
Bump. Help needed please ! |
|
| Author: | ZeXx86 [ Sat 23. Jun 2018 16:22:20 ] |
| Post subject: | Re: Help with Hobbywing SCM please ? |
Hello, you do not need the SCM module. But it could improve RPM or telemetry connection. Unfortunately I can answer your question on monday. I hope it is OK. Is there any problem you are having right now? |
|
| Author: | Dawiev [ Sat 23. Jun 2018 18:07:25 ] |
| Post subject: | Re: Help with Hobbywing SCM please ? |
Thanks for the reply. I get all the telemetry values, except mah consumed. Monday, no problem. Thanks in advance |
|
| Author: | Dawiev [ Mon 02. Jul 2018 3:47:57 ] |
| Post subject: | Re: Help with Hobbywing SCM please ? |
Maybe this Monday ?  
|
|
| Author: | ZeXx86 [ Mon 02. Jul 2018 7:44:14 ] |
| Post subject: | Re: Help with Hobbywing SCM please ? |
I am very sorry for delayed reply. You can connect it according the manual that you have attached. Throttle signal can be connected directly to the AUX port of the unit while Telemetry data should be connected through this SCM module. This module is designed mainly for RPM and Telemetry data ports of the ESC. But if you do not use RPM lead you do not have to connect it anywhere. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
