It is currently Sun 24. Nov 2024 17:46:24

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 07. Jun 2018 18:38:16 
Offline

Joined: Mon 20. Feb 2017 10:19:31
Posts: 19
First, I have to apologize for my poor english. Hopefully one can understand my descriptions.

I have some problems with my T-Rex 450 semiscale on yaw. If I do some yaw steering left(nose to left, backrotor pulling), the heli moves left backwards. Otherwise it moves forward. For better understanding I have filmed this. In the video I go to stable hovering and then only use yaw.
https://youtu.be/x7qVZ-r-W7I

COG is perfect. I have no idea what is wrong. On my t-rex 500 it works perfect. Any ideas?

Greetings Andreas

Gesendet von meinem SM-G930F mit Tapatalk


Top
 Profile  
 
PostPosted: Sat 09. Jun 2018 21:55:48 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello,

it look like some basic settings is not correct. Very probably CH1 and CH3 servos could be swapped and/or Swashplate type is reversed and/or some channel in your radio is not reversed correctly.
So these things could be wrong at the same time so that helicopter can fly, but not correctly.

This will cause that pirouette optimization is not in the right direction and model is changing direction with a rudder input.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 13. Jun 2018 18:28:15 
Offline

Joined: Mon 20. Feb 2017 10:19:31
Posts: 19
Thank you for your reply.

In my basic setting (before changing Servos) the left servo is on ch1, the right is on ch3. I think this is correct.

But I tested it out changing servos, but there was no chance to get it work correctly. If I change the servo 1 and 3 it's possible to find a way to steer correctly, but the stabi then works wrong. I can choose if nick or roll compensation is in the wrong way. Both won't be correct. This would be fatal... ;-)

So, I think my setting is correct....

Perhaps the scale tail is the issue?

Greetings Andreas
.

Gesendet von meinem SM-G930F mit Tapatalk


Top
 Profile  
 
PostPosted: Fri 15. Jun 2018 11:05:46 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
What I recommend is to check this page:
http://manual.spirit-system.com/index.p ... tive_Pitch

Although it is not directly related to your issue, I believe that going through the guide could solve all potential issues.
This then could exclude many possible errors either in mechanical setup and configuration of the unit or radio.

Yes, there is a chance that fuselage adds extra weight to a side, which is causing drifting. Something could be very unbalanced there. For example just direction of the rudder rotor thrust can influance it a lot.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 63 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .