| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Mechanical Mixing - Non-eCCPM https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2576 |
Page 1 of 1 |
| Author: | Spartan2381 [ Wed 30. May 2018 19:40:24 ] | ||
| Post subject: | Mechanical Mixing - Non-eCCPM | ||
I have a Kyosho Caliber 5 with a flybar that uses mechanical mixing instead of electronic mixing. I wanted to know if the Spirit supports this configuration and if I can use the stabi features of the controller. I have attached a picture of the swash for reference. If supported do I need to take any special steps for setup or just follow the manual?
|
|||
| Author: | ZeXx86 [ Thu 31. May 2018 12:10:36 ] |
| Post subject: | Re: Mechanical Mixing - Non-eCCPM |
Hello, yes, Spirit has support for mechanical mixing. You have to only set CCPM 90° if each function is controlled separately by a dedicated channel. It is same for some older Raptor helicopters too. |
|
| Author: | Spartan2381 [ Thu 31. May 2018 12:48:17 ] |
| Post subject: | Re: Mechanical Mixing - Non-eCCPM |
Thats great to hear. I went ahead and placed an order. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|