Spirit System
https://www.spirit-system.com/phpBB3/

[SOLVED] All the way SPIRIT PRO...
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2522		 Page 1 of 1
Author:  Syngorextor [ Mon 16. Apr 2018 9:15:12 ]
Post subject:  [SOLVED] All the way SPIRIT PRO...
:D Hello Spirit task-force, so amazing with this kind of FBL and in just 6 months got 5 Spirit all together: (2 Pro V1 ans 3 Pro v2). Going to install the Spirit Pro-V2, into my old 3-blades 550e Raptor. Any advice and guideline regarding the PHASING, very much appreciate. Thank you very-very much and every-one, Happy Spirit Flying.

Regards, :mrgreen: :mrgreen: :mrgreen:

RM; (Syngorextor)
Author:  ZeXx86 [ Mon 16. Apr 2018 9:24:27 ]
Post subject:  Re: All the way SPIRIT PRO...
Hello,

thank you for kind words!

If your rotor head has mechanical phasing, then you do not have to set any in the unit.
The most heads do not require it.

It will work with a default settings.

You might just need to reduce Cyclic Feed Forward to 3-4 as the head response could be too aggressive.
Author:  Syngorextor [ Wed 18. Apr 2018 9:33:54 ]
Post subject:  Re: All the way SPIRIT PRO...
:) Thanks Tomas, will try this weekend and hope everything will be fine and smooth.Got your email, regarding my order and it just fabulous...outstanding service and once again thank you. Looking forward to try-out the GPS soon once you guys release it to the market.
Regards,

Rui M (Syngorextor)
Author:  ZeXx86 [ Thu 19. Apr 2018 7:17:03 ]
Post subject:  Re: All the way SPIRIT PRO...
Thank you for your kind words!
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/