| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Micro spirit and bluetooth https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2516 |
Page 1 of 1 |
| Author: | Pking [ Thu 12. Apr 2018 22:12:09 ] |
| Post subject: | Micro spirit and bluetooth |
Hi, Can i connect and use the Bluetooth module with the micro spirit ? |
|
| Author: | ZeXx86 [ Thu 12. Apr 2018 22:20:52 ] |
| Post subject: | Re: Micro spirit and bluetooth |
Hi, yes, you can use any peripheral that is compatible with Spirit units. You might need just adapters (up to 2x JST-Servo). If you have receiver with a free servo port, you can use this port for powering. And communication cable will be connected by the JST-Servo provided for the USB interface. |
|
| Author: | Pking [ Thu 12. Apr 2018 22:29:39 ] |
| Post subject: | Re: Micro spirit and bluetooth |
Thanks you are very fast to answer. I am setting up for a 230S, I read on a post about confit for a tail motor but can’t find the parameters and what I have to do in this situation. In the software they’re is the 230S preset but not sure what has to change. |
|
| Author: | ZeXx86 [ Fri 13. Apr 2018 13:42:06 ] |
| Post subject: | Re: Micro spirit and bluetooth |
Hello, you should configure everything that is in the Setup wizard to make it work correctly. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|