| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Question on mounting the Spirit https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2452 |
Page 1 of 1 |
| Author: | ryguy76 [ Tue 27. Feb 2018 4:45:25 ] |
| Post subject: | Question on mounting the Spirit |
Hi, I am finishing up on a new Oxy 4 build and noticed that the boom clamp has a slight seam between the mating pieces. If I place the Spirit in the middle of the boom clamp, I can rock the FBL from side to side slightly due to the high center of the seam. I had used the white foam tape to mount the Spirit and it looked a little off-level to the eye. Is this something that really matters? Does it need to be perfectly level or is this my OCD getting in the way? Thanks in advance. |
|
| Author: | ZeXx86 [ Tue 27. Feb 2018 8:10:56 ] |
| Post subject: | Re: Question on mounting the Spirit |
Hi, in that case it is better to cut two pieces of the tape and make a kind of rails under the unit. so that in the middle there is nothing. More precisely the unit is mounted, more precisely it will fly. |
|
| Author: | ryguy76 [ Tue 27. Feb 2018 21:08:12 ] |
| Post subject: | Re: Question on mounting the Spirit |
Thanks Tomas. Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|