Spirit System
https://www.spirit-system.com/phpBB3/

ESC Throttle Cable Channel Question
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2369		 Page 1 of 1
Author:  sawacs [ Tue 02. Jan 2018 22:09:27 ]
Post subject:  ESC Throttle Cable Channel Question
I am setting up a Spirit Pro FBL on my Trex 700x and have a question regarding the throttle cable.

Specs:
Spirit Pro
Jeti DS-16
Jeti REX10 with a R3RSW in dual path
Hobbywing 120a V4

Where exactly should the esc throttle cable be plugged in on the Spirit Pro?
I have the following channels:
Aux1
Aux2
Chan 0

Lastly, I will be using the Hobbywing governor rather than the Spirit governor

Thanks!

Update: I figured out where the connection goes and everything is working great.

Cheers!
Author:  Syngorextor [ Wed 03. Jan 2018 11:10:22 ]
Post subject:  Re: ESC Throttle Cable Channel Question
sawacs wrote:
I am setting up a Spirit Pro FBL on my Trex 700x and have a question regarding the throttle cable.

Specs:
Spirit Pro
Jeti DS-16
Jeti REX10 with a R3RSW in dual path
Hobbywing 120a V4

Where exactly should the esc throttle cable be plugged in on the Spirit Pro?
I have the following channels:
Aux1
Aux2
Chan 0

Lastly, I will be using the Hobbywing governor rather than the Spirit governor

Thanks!

Update: I figured out where the connection goes and everything is working great.

Cheers! :)

I Believe on AUX1 channel, but please double check the manual...hope this help and good luck.
Author:  ZeXx86 [ Thu 04. Jan 2018 8:17:39 ]
Post subject:  Re: ESC Throttle Cable Channel Question
Yes, it is AUX0 port as described in the manual (Wiring section).
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/