| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Set up SPIRIT PRO (rescue) https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2368 |
Page 1 of 1 |
| Author: | MOREAU [ Tue 02. Jan 2018 21:04:43 ] | |||
| Post subject: | [SOLVED] Set up SPIRIT PRO (rescue) | |||
Hello I guess my last post is closed ( solved). after all settings on my Futaba T8FG like your "set up guide for Futaba" : gain giro at 60% On diagnostic : Giro / normal condition 68% Giro / SH button ON / 63% ("Rescue" appears) Is it the right setting ? why not 60% for nc and -60% for rescue ? Thank for you help  Regards
|
||||
| Author: | ZeXx86 [ Thu 04. Jan 2018 8:29:18 ] |
| Post subject: | Re: Set up SPIRIT PRO (rescue) |
Hello! It looks to be good. There could be little bit difference between % if channel center is not exact. For Gyro channel you can fix it by using a Subtrim for Gyro channel in your radio until you will obtain same percentages in both directions. If you can see + Rescue, then it mean that you have entered negative gyro gain. This is correct behavior. But the actual Gyro Gain for the unit will be 60%. So basically all is correct and even with the gain difference you can fly now. S-BUS connection is little bit more precise, because it is tailored exactly for Futaba and data are sent digitally. But it is small difference and PWM will work as well. |
|
| Author: | MOREAU [ Thu 04. Jan 2018 11:41:23 ] |
| Post subject: | Re: Set up SPIRIT PRO (rescue) |
Hello, As you say it's simpler in S BUS, I connected a receiver FRSKY TFR8 SB. Set up ok with giro gain + 60% and -60% in RESCUE. But a question? Which channel of the TFR8 receiver should I connect the optional cable from AUX1 of the spirit module? (I already connected the ESC on channel 3 of the receiver S BUS.) Many thanks |
|
| Author: | ZeXx86 [ Thu 04. Jan 2018 12:27:36 ] |
| Post subject: | Re: Set up SPIRIT PRO (rescue) |
Hello, you can use any other channel. |
|
| Author: | MOREAU [ Fri 05. Jan 2018 9:14:13 ] |
| Post subject: | Re: Set up SPIRIT PRO (rescue) |
Hello Thank you for your availability Regards |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|