Hello Tomas!
Because of a shorter cable laying in the TDF, I used the Secondary Port.
I have now connected the primary port.
Now I have all the ads in the DS16 !!!
Thank you!
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Hobbywing 130 V4 and Telem UNI cable with DS16? https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2249 |
Page 1 of 1 |
| Author: | Franky13 [ Sun 01. Oct 2017 12:21:32 ] |
| Post subject: | [SOLVED] Hobbywing 130 V4 and Telem UNI cable with DS16? |
Hello! I have a few problems with the Telem UNI with the Hobbywing 130 controller. As far as described I have everything connected correctly. In the DS16 I have the ads; Temp, Cap, RPM, Volt, Current, Vips, but they are all zero? Only temp is at 25.5 degrees. Software is up to date! What can I do? Greeting Frank |
|
| Author: | ZeXx86 [ Sun 01. Oct 2017 12:37:16 ] |
| Post subject: | Re: Hobbywing 130 V4 and Telem UNI cable with DS16 / No Data |
Hello Frank. Please check firmware in the ESC. Older version does not support the telemetry. You can also verify if you are using the primary satellite port. |
|
| Author: | Franky13 [ Sun 01. Oct 2017 13:30:46 ] |
| Post subject: | Re: Hobbywing 130 V4 and Telem UNI cable with DS16 / No Data |
Hello Tomas! Because of a shorter cable laying in the TDF, I used the Secondary Port. I have now connected the primary port. Now I have all the ads in the DS16 !!! Thank you! |
|
| Author: | ZeXx86 [ Sun 01. Oct 2017 13:40:22 ] |
| Post subject: | Re: Hobbywing 130 V4 and Telem UNI cable with DS16 / No Data |
Great! It must be always at primary port. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|