It is currently Sun 24. Nov 2024 12:10:36

All times are UTC + 1 hour





Post new topic Reply to topic  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: slow pumping response
PostPosted: Sat 30. Sep 2017 13:36:37 
Offline

Joined: Mon 14. Sep 2015 15:44:06
Posts: 95
Hi

One of my heli's flip response is quite fast but when I do pitch pumping response is sluggish.

blade length = 360mm (480 class)
collective angle = 13 degree
cyclic angle = 8 degree
RPM = around 2800~3400 (?) anyway, increasing rpm didn't help

flight style = 6

feel like internal expo for collective pumping... but not for cyclic movement.

Which parameter should I change?

_________________
"Flying makes me happy" -- Markus Chelios


Top
 Profile  
 
PostPosted: Sat 30. Sep 2017 18:32:32 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hi,

unfortunately there is no parameter that could affect the collective other than the Collective Pitch Range.

If you feel a delay, then it could be caused by a problem with axial ball bearings in the rotor head.
Then it will cause delayed response and also other unwanted phenomenons. But firstly you can notice slow collective response.
So I recommend to check the rotor head.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 10. Oct 2017 11:20:15 
Offline

Joined: Mon 14. Sep 2015 15:44:06
Posts: 95
It was my bad.
Collective was 10 deg. I've changed it to 13 deg. and it feels alright.
I will reduce cyclic from 8 to 6 deg.

I like the rolling. it's quite smooth compare to *BAR.

KH

_________________
"Flying makes me happy" -- Markus Chelios


Top
 Profile  
 
PostPosted: Tue 10. Oct 2017 11:32:32 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Great!
If you mean Cyclic Ring, then even 8° could be too low.
This limit should be at least around 9°.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 10. Oct 2017 11:51:29 
Offline

Joined: Mon 14. Sep 2015 15:44:06
Posts: 95
I meant cyclic pitch angle. I think I set it as 8 deg. during PC setup. (May be I mixed up with *BAR - I remember it was 6 deg. in *BAR)
Cyclic ring is 11 deg. Anyway, it feels alright so I will leave as it is for now.

Thank you for advice.

Regards,

KH

_________________
"Flying makes me happy" -- Markus Chelios


Top
 Profile  
 
PostPosted: Wed 11. Oct 2017 21:47:12 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
What do you mean with "Cyclic pitch angle" being different to "Cyclic ring" degrees?

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
PostPosted: Thu 12. Oct 2017 5:15:31 
Offline

Joined: Mon 14. Sep 2015 15:44:06
Posts: 95
Coco66 wrote:

What do you mean with "Cyclic pitch angle" being different to "Cyclic ring" degrees?

Please, refer this physical ring story for mode 2. Modern FBL uses digital limits. Instead of real ring.

https://rc.runryder.com/helicopter/t217916p1/

_________________
"Flying makes me happy" -- Markus Chelios


Top
 Profile  
 
PostPosted: Thu 12. Oct 2017 7:11:27 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
RedJacket: Indeed, but our unit has electronic Cyclic Ring :)
Coco66: I think he meant Cyclic Ring - Aileron/Elevator Range parameter.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .