| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| HobbyWing / Tribunus integration cable https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2132 |
Page 1 of 1 |
| Author: | cycled [ Thu 03. Aug 2017 16:10:33 ] |
| Post subject: | HobbyWing / Tribunus integration cable |
Regarding this cable... http://store.spirit-system.com/en/acces ... cable.html ... is it easy to make one myself, or is there something special involved? The reason I ask is (a) I need roughly 25cm length on my heli, not just 15cm, and (b) I'd prefer not wait for one to arrive. Also: are all three pins needed? Can I just connect the signal and use the other two pins for the ESC fan? Thanks |
|
| Author: | Coco66 [ Thu 03. Aug 2017 20:37:07 ] |
| Post subject: | Re: HobbyWing / Tribunus integration cable |
Maybe Tomáš will answer and explain, but please remember that we get ALL THIS for free in firmware, and the only way that Spirit can recover some of the R&D and Dev costs is by selling those cable accessories... |
|
| Author: | cycled [ Thu 03. Aug 2017 21:23:47 ] |
| Post subject: | Re: HobbyWing / Tribunus integration cable |
Check the prices Coco. I think €6 is just to cover their costs; the real money is made on the flybarless units. |
|
| Author: | Coco66 [ Thu 03. Aug 2017 21:41:55 ] |
| Post subject: | Re: HobbyWing / Tribunus integration cable |
Of course, but still, nobody forces them to release so many nice updates all the time )))) |
|
| Author: | cycled [ Fri 04. Aug 2017 8:33:07 ] |
| Post subject: | Re: HobbyWing / Tribunus integration cable |
Oh, there's already a thread on this. I searched for "telemetry" but someone used the German spelling in the other thread, so search didn't work. |
|
| Author: | cycled [ Fri 04. Aug 2017 8:43:13 ] |
| Post subject: | Re: HobbyWing / Tribunus integration cable |
The brown/black is already connected via the BEC, right? So I only need the yellow signal wire, and it's just a straight connection (no resistors or anything else)? |
|
| Author: | ZeXx86 [ Fri 04. Aug 2017 9:18:40 ] |
| Post subject: | Re: HobbyWing / Tribunus integration cable |
Yes, only orange and brown wires are used. Red must be disconnected always. The connection is direct with no resistor. |
|
| Author: | cycled [ Fri 04. Aug 2017 13:49:10 ] |
| Post subject: | Re: HobbyWing / Tribunus integration cable |
Since connecting the HobbyWing v4 (120A model), I can no longer get the Graupner HoTT integration to work. Any ideas? It might actually be switching ESC telemetry on in the Spirit settings? I have 2 wires (ground/black and signal) connected to the receiver, and 1 wire (signal/orange) connected to the ESC. Edit: after switching "ESC telemetry" off (disabled), the Graupner integration is working again. (ESC telemetry wire not connected.) |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|