Spirit System
https://www.spirit-system.com/phpBB3/

Kosmik Telemetrie???
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2118		 Page 1 of 1
Author:  gerry [ Sat 29. Jul 2017 19:53:38 ]
Post subject:  Kosmik Telemetrie???
Hello Tomas!
There are still problems with the RPM at Kontronik Cosmic Telemetry / Jeti !!
Sensing Divider = 1
Gear Ratio = 1.0

Kosmik
Motor poles 14
Subclause 10.18: 1

The telemetry display outputs 160 RPM, but it should be approx.1600RPM ??
What can be the error here?
I have already tried everything!

Ask for solution !!
Greetings, Gernot
Author:  ZeXx86 [ Sat 29. Jul 2017 19:58:38 ]
Post subject:  Re: Kosmik Telemetrie???
Leave default settings in the ESC and set parameters in the Spirit. Then it will work!!! :)
Author:  gerry [ Sat 29. Jul 2017 20:35:02 ]
Post subject:  Re: Kosmik Telemetrie???
Hello Tomas!
I have already tried this,
Kosmik
Pole 2(Default)
Understanding 1.0: 1

And Spirit
Sensing Devider = 7(14 Pole)
Gear Ratio = 10.15

Completely false ad?
Something is wrong here??
Author:  ZeXx86 [ Sat 29. Jul 2017 20:41:03 ]
Post subject:  Re: Kosmik Telemetrie???
This should be good.

Do you have the latest firmware version? (2.4.2)
Author:  gerry [ Sat 29. Jul 2017 21:04:32 ]
Post subject:  Re: Kosmik Telemetrie???
Yes I have the 2.4.2 on it!
I do not understand waru it does not work?
Please try again and try to find a solution!
Author:  ZeXx86 [ Sat 29. Jul 2017 21:07:04 ]
Post subject:  Re: Kosmik Telemetrie???
We have many models where it is working very well.

What value do you see right now?
Author:  gerry [ Sun 30. Jul 2017 7:44:46 ]
Post subject:  Re: Kosmik Telemetrie???
Hello Tomas!
The displayed RPM = 432 RPM
It would be about 1600 RPM.
Perhaps it is because I have the Kosmik default 2 Pole?
I hope there will be a solution, we are four pilots with several helicopters and they are all waiting for the problem to be solved!
Greetings, Gernot
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/