| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Spirit software does not start anymore https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2061 |
Page 1 of 2 |
| Author: | Franky13 [ Mon 19. Jun 2017 20:18:00 ] |
| Post subject: | Spirit software does not start anymore |
Hello! My Spirit software does not start anymore ...? I can only open the demo mode. The spirit works normally The software I have already installed! My other Spirit FBL work! Thanks! |
|
| Author: | Coco66 [ Mon 19. Jun 2017 20:24:47 ] |
| Post subject: | Re: Spirit software does not start anymore |
Make sure the plug to the FBL is fully in... that's what happens when the PC Software does not "see" the unit... |
|
| Author: | ZeXx86 [ Mon 19. Jun 2017 21:16:18 ] |
| Post subject: | Re: Spirit software does not start anymore |
Alternatively the USB interface was damaged, please check that the wires are good, especially on the PCB. Some users are pulling it by cables, which is not making them happy  Or do you remember what was the last operation when it worked? Did you reconfigured something? |
|
| Author: | Franky13 [ Tue 20. Jun 2017 18:17:31 ] | |||
| Post subject: | Re: Spirit software does not start anymore | |||
Tomas, you're right! I have the cable re-soldered and the software works again perfectly! Thanks!!! Greeting Frank
|
||||
| Author: | ZeXx86 [ Tue 20. Jun 2017 21:18:11 ] |
| Post subject: | Re: Spirit software does not start anymore |
Good job! Thank you for the message. |
|
| Author: | Franky13 [ Wed 21. Jun 2017 18:01:10 ] |
| Post subject: | Re: Spirit software does not start anymore |
Hi! I do not know what's going on, now it is not again. Again goes only the demo mode ...? 
|
|
| Author: | ZeXx86 [ Wed 21. Jun 2017 20:41:16 ] |
| Post subject: | Re: Spirit software does not start anymore |
Hi, maybe the problem is again there. From the photo I can see that there is some wire which is nearly touching other one. Maybe it shorted there. |
|
| Author: | Franky13 [ Thu 22. Jun 2017 17:48:00 ] |
| Post subject: | Re: Spirit software does not start anymore |
Sorry Tomas, the second photo is after the new soldering. No cables or contacts touch on the photo. Another idea? |
|
| Author: | ZeXx86 [ Thu 22. Jun 2017 18:07:42 ] |
| Post subject: | Re: Spirit software does not start anymore |
Are you sure that you have not enabled for example Kontronik telemetry? This would disable USB communication as described in the Telemetry window. |
|
| Author: | Franky13 [ Thu 22. Jun 2017 18:23:21 ] |
| Post subject: | Re: Spirit software does not start anymore |
Tomas, this is another post...!? |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|