It is currently Sun 24. Nov 2024 7:27:18

All times are UTC + 1 hour





Post new topic Reply to topic  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 22. May 2017 19:31:11 
Offline

Joined: Thu 08. Oct 2015 14:43:12
Posts: 204
Location: Switzerland
Just want to thank Tomas for this great new implementation.

Give it a try. I'm running HW V4 120A on my Soxox 550 with new FW 2.4.1 with Horus FrSky transmitter.
After first fly and recharge, I adjusted I shunt to 95% and now it matches up on charged value.
I'm using alerts on BEC- and Battery-Voltage as well as on consumed mAh reported from HW ESC to Spirit and back into my TX.
Flying with low rpm for 8 Min and 3D for 3.5 Min and it matches. No additional Sensors just one cable from ESC to Spirit Sat POrt and your done.
No more guessing based on timers, fly on gauge.

Well done, big thanks :D

_________________
Oxy4max SpiritPro + HW // SOXOS 550, SpiritPro, HW120A V4, 920KV // SOXOS 600, SpiritPro, HW160A, Pyro650 // SOXOS Strike7, SpiritPro, HW160A, Pyro750 // Skywing Spirit Aero // FrSky Horus X10S + Taranis X7 /


Top
 Profile  
 
PostPosted: Thu 25. May 2017 16:28:47 
Offline

Joined: Sun 14. Jun 2015 6:43:47
Posts: 12
If I may ask: how accurate is the max.Ampere rate
coming from the Hobbywing ?

My 130V4 shows 180 Ampere as a maximum in a 700 Rex
when the Unisens-E says 130 Amps, and I trust the Unisens
"a lot" :-)

Martin


Top
 Profile  
 
PostPosted: Fri 26. May 2017 19:48:00 
Offline

Joined: Thu 08. Oct 2015 14:43:12
Posts: 204
Location: Switzerland
I use IISI to compare and during normal flight I got quite same results on peak current.
If I really go hard on sticks I do see higher currents on Telemetry HW (189A) than IISI (154A). Well this is peak and hard to judge I could only tell if compared with high quality lab equipment. IISI might do some filtering or does integration to build average. Do I care? Not really, for me only used Capacity as well as min Bat Voltage is relevant Peak I is kind of nice to know.

Beside I got asked on my HW Setup:

HW in Gov Store Mode
Had to reduce P and I Gain to get solid tail as values where a bit to aggressive.
Bailout working perfect with this setup as well.
I use rpm cable, but manual sais rpm should work with ESC telemetry only as well.
It requires Gov Setting in Spirit like Gear and Magnets/2 to get right numbers (Select / enter / de-Select Gov tick)

_________________
Oxy4max SpiritPro + HW // SOXOS 550, SpiritPro, HW120A V4, 920KV // SOXOS 600, SpiritPro, HW160A, Pyro650 // SOXOS Strike7, SpiritPro, HW160A, Pyro750 // Skywing Spirit Aero // FrSky Horus X10S + Taranis X7 /


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .