| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| EEPE file dosent work on qx7... https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1983 |
Page 1 of 1 |
| Author: | spirited [ Sun 21. May 2017 11:33:01 ] |
| Post subject: | EEPE file dosent work on qx7... |
-Source S3 Cannot be exported to this board -Source LS cannot be exported to this board. Thats what happens when I try to use the file and simulate on companion 2.2. Whats needed? |
|
| Author: | spirited [ Sun 21. May 2017 13:56:40 ] |
| Post subject: | Re: EEPE file dosent work on qx7... |
Someone answered me on another forum. So its due to the channel assignments as the qx7 doesent have a left slider or 3rd dial. Im completely new to this radio and opentx and Im trying to learn it all. Is there any channel map or anything to the eepe file assignments just so I can understand how you have it set up? Im curious as to what and\or why the slider or dials are used in any way for spirit. Ive been using spirit for years and have it installed all all my helis but have never used any dials or sliders to control anything in my setups. |
|
| Author: | ZeXx86 [ Sun 21. May 2017 16:42:03 ] |
| Post subject: | Re: EEPE file dosent work on qx7... |
The profile was created for Taranis X9, so this is reason why there are such issues - some switches are not available. You can just unassign these functions or change the "source" to other available switch. Channel mapping should be same with X9, so you can use the same. I understand that you have lot of to learn - FrSky radios support many, many features. Once you will learn how to configure it, you will really love it. If you will be still unable to make it work, we will prepare profile specially for X7. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|