| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| oscillates on Tail, Logo500 https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1952 |
Page 1 of 1 |
| Author: | Bjoern_ve [ Sun 30. Apr 2017 16:07:54 ] |
| Post subject: | oscillates on Tail, Logo500 |
HI. After an update from the 1.xx to the current firmware, I have my LOGO 500 problems with the rear. It oscillates at a speed of approx. 1500rpm. At higher speeds I could not determine. Is there an explanation? Setup: Kontronik Jive100LV Swashplate: 3x Savöx 1257TG Tail: Savöx 1290mg Motor: Scorpion 4020 1100KV Björn |
|
| Author: | ZeXx86 [ Sun 30. Apr 2017 22:02:04 ] |
| Post subject: | Re: oscillates on Tail, Logo500 |
Hi, there are big difference between 1.x and 2.x firmwares. So it will require also slightly different setup. Especially regarding the Gyro Gain, Rudder Delay and Pirouette Consistency. Also Subtrims are different. So if you are using same values, it might be needed to update them. You can send me your settings so I can check it. |
|
| Author: | Bjoern_ve [ Mon 01. May 2017 9:54:08 ] | ||||
| Post subject: | Re: oscillates on Tail, Logo500 | ||||
Hi, here are my settings files. Björn
|
|||||
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
