| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| stabi/rescue using assigned channel/switch https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1882 |
Page 1 of 1 |
| Author: | andy6409 [ Sun 12. Mar 2017 9:43:11 ] |
| Post subject: | stabi/rescue using assigned channel/switch |
Is it possible to have stabi and rescue on a switch using the new channel selection method, for example stabi with switch off and recue with switch on so I am always flying in stabi mode At the moment I am using banks to give me stabi acro on bank 1 and rescue on bank 2 and have permanent negative gyro gain to activate it |
|
| Author: | ZeXx86 [ Sun 12. Mar 2017 12:10:54 ] |
| Post subject: | Re: stabi/rescue using assigned channel/switch |
Hello, when using method described here: http://manual.spirit-system.com/index.p ... te_channel then negative Gyro gain will not activate any of these modes (it will be switching only between Gyro modes) as described in the table. Yes, you can use Banks where for each bank you can select a different mode (Rescue/Stabilisation) and then activate it by a channel. It can be activated all the time. So settings will be very similar as you have it right now. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|