Spirit System
https://www.spirit-system.com/phpBB3/

[SOLVED] Values for cyclic gain are not the same ?
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1845		 Page 1 of 1
Author:  icare [ Fri 17. Feb 2017 17:42:20 ]
Post subject:  [SOLVED] Values for cyclic gain are not the same ?
Here are two screen shots: the first shows the cyclic gain value trough the web browser firefox on my android phone and the second one shows the cyclic gain value with the android appli, (wifi link also)
The problem is that values are different, while I have not changed the settings between the two screen shots : 60 and 40 ?

(The module is the red one, with the latest firmware. the same for the android appli. Wifi link .)

I wonder what my error could be?


Image

Image
Author:  buell47 [ Fri 17. Feb 2017 20:00:15 ]
Post subject:  Re: Values for cyclic gain are not the same ?
That's right, checked mine right now and have the same results.

PC Software show correct values, but Android App shows every time 20 less.

It's a bug. Tomas will fixed it probably very fast

Image
Image
Image
Image
Author:  icare [ Fri 17. Feb 2017 20:37:15 ]
Post subject:  Re: Values for cyclic gain are not the same ?
ok, thank you for your answer.

I am going to refer to the pc software for the cyclic gain. Of alls ways, the more important is the behaviour of the heli in flight !

All the others values are the sames between the android appli and the browser on my phone.
Author:  ZeXx86 [ Fri 17. Feb 2017 20:53:52 ]
Post subject:  Re: Values for cyclic gain are not the same ?
Thank you for your report.

This is really wrong. We will send the report to the Android app developer. This one app is not directly developed by us, but we are in cooperation.
Tommorow it might be fixed.
Author:  buell47 [ Sat 18. Feb 2017 19:53:06 ]
Post subject:  Re: [SOLVED] Values for cyclic gain are not the same ?
Yes, it's fixed with the updated App 2.3.0
Author:  icare [ Sat 18. Feb 2017 21:03:20 ]
Post subject:  Re: [SOLVED] Values for cyclic gain are not the same ?
I saw that a few hours ago. I have updated my two units, the wifi link and the android app.

And the activation of the rescue by a separate channel is a great improvement : Now I will be able to use the acro rescue function on my 3 idle up very easily. I will try this tomorrow :)
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/