Thanks, rotation speed worked, much tamer for a beginer doing circuits, thanks
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Cyclic Range https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1813 |
Page 1 of 1 |
| Author: | vicbitter57 [ Sat 28. Jan 2017 6:48:07 ] |
| Post subject: | [SOLVED] Cyclic Range |
Hi folks, I,ve previously flown a Blade 200 srx and a HK450 hovering (between crashes). I now have a new Align 450se kit from 2006 that I have converted to FBL. My query is where do I change the cyclic range, in the Tx or in the spirit. I want to tone it down a bit for practicing circuits. At the moment it really can get away from me. The blade you could put in different ranges, so thats sort of what I want, without hindering the rescue functions cyclic range. Hope this makes sense, regards VB. |
|
| Author: | buell47 [ Sat 28. Jan 2017 9:25:59 ] |
| Post subject: | Re: Cyclic Range |
Leave the cyclic ring in the Spirit untouched and decrease cyclic rotation speed and/or use Dual Rate/Expo on your TX. These Settings will not effect the rescue. |
|
| Author: | ZeXx86 [ Sat 28. Jan 2017 18:46:31 ] |
| Post subject: | Re: Cyclic Range |
For settings of the mechanical limit there is the Cyclic Ring - Aileron / Elevator Range. For making flip/roll rate slower/faster there is the Rotation speed in the Sensor tab. While Cyclic Ring limit is defined rather by the helicopter itself, the Rotation speed is defined purely by your preference. |
|
| Author: | vicbitter57 [ Sat 28. Jan 2017 20:44:09 ] |
| Post subject: | Re: Cyclic Range |
Thanks guys, I,ll limit it with the transmiter settings as I suppose the rotation does not actually limit it, just changes the speed that it gets to it limits. Found the Spirit to be a lot smoother and the tail a lot more solid than the vbar I run in the HK450. Excellent work, thank you. Also noticed the Align is a lot more nimble and lighter in the air than the HK, I suppose with the clones price is more important than material weight to them. Regards VB. |
|
| Author: | ZeXx86 [ Sat 28. Jan 2017 20:48:27 ] |
| Post subject: | Re: Cyclic Range |
Great! I also recommend to use Rotation speed in the unit for rough settings. Dual Rate only for fine tuning in range between 90 - 100%. |
|
| Author: | vicbitter57 [ Sat 28. Jan 2017 21:59:33 ] |
| Post subject: | Re: Cyclic Range |
Thanks, rotation speed worked, much tamer for a beginer doing circuits, thanks
|
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|