| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Help wiring my Kosmik 160hv https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1696 |
Page 1 of 1 |
| Author: | Demetrius [ Sun 30. Oct 2016 0:27:51 ] |
| Post subject: | Help wiring my Kosmik 160hv |
Okay, I have a kosmik 160hv set to 8v and I want to run a buffer pack from the slave channel to keep it charged. I don't have the pro version,so I have to use a y adapter but where do I put it? I don't have an open spot on the Spirit, do I put the y adapter at the esc port? Or where, any help you all can give is appreciated? Thanks |
|
| Author: | ZeXx86 [ Thu 03. Nov 2016 13:55:53 ] |
| Post subject: | Re: Help wiring my Kosmik 160hv |
Hello, sorry for late response. You can put buffer pack to your receiver if there is a free slot. Alternatively you can use Y-cable such as this: https://www.conrad.de/de/servo-y-kabel- ... 08394.html You can connect it to the RUD port where it can feed servos well. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|