|
It is currently Sun 24. Nov 2024 1:02:43
|
View unanswered posts | View active topics
| Author |
Message |
|
mb-1953
|
 Posted: Wed 24. Aug 2016 23:56:13 |
|
Joined: Tue 03. Mar 2015 15:55:50
Posts: 98
|
|
I upgraded my spirit pro on my velos. The upgrade was fine. When I went to take off in N which is set to be governed at 1650, the rpms went up very high. I switched on throttle hold and then let the esc's ramp up again. This time the governor "kicked in" and held rpm as it had before. I checked IU1 and IU2 with a tach and everything seemed governed. The next flight the same thing happened.
Any ideas what is going on here?
Thanks.
|
|
| Top |
|
 |
|
leatherface
|
Posted: Thu 25. Aug 2016 7:50:32 |
|
Joined: Wed 08. Oct 2014 11:21:06
Posts: 72
Location: sydney,australia
|
|
This happened on my x3 after the update to 2.1.0.govened for around 3000rpm at 80%throttle.when i had first flight after update it had to have been close to 100%.will be keen to hear what the problem might be.
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Thu 25. Aug 2016 9:15:37 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
You have to decrease governor gains. If updating to 2.1 governor gains should be configured again as stated in the Changelog else the reactions might be too strong.
_________________
Spirit System developer
|
|
| Top |
|
|
|
mb-1953
|
Posted: Thu 25. Aug 2016 11:19:21 |
|
Joined: Tue 03. Mar 2015 15:55:50
Posts: 98
|
|
Sorry for not understanding Tomas, when you say governor gains, do you mean readjust governor response and holding performance? Not sure what "Changelog" is?
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Thu 25. Aug 2016 11:22:36 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Yes, exactly.
Changelog is list of changes that were made from previous to the latest version.
You can find it in the News section here in each announcement or in the software in the News window.
_________________
Spirit System developer
|
|
| Top |
|
|
|
mb-1953
|
Posted: Thu 25. Aug 2016 11:54:13 |
|
Joined: Tue 03. Mar 2015 15:55:50
Posts: 98
|
|
Thank you, will try it today.
|
|
| Top |
|
|
|
mb-1953
|
Posted: Fri 26. Aug 2016 12:57:33 |
|
Joined: Tue 03. Mar 2015 15:55:50
Posts: 98
|
|
With governor response at 2 and holding at 1, it is still happening. I have 2 machines and it occurs on both. I am concerned about revving an 850 sized helicopter over 2200rpm.
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Fri 26. Aug 2016 13:09:01 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Could you please share your settings?
It looks like something is not matching - I suspect that throttle range in the ESC might not match with throttle range in the transmitter or similar issue.
Was spoolup rate correct or faster?
_________________
Spirit System developer
|
|
| Top |
|
|
|
mb-1953
|
Posted: Fri 26. Aug 2016 13:40:19 |
|
Joined: Tue 03. Mar 2015 15:55:50
Posts: 98
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Sat 27. Aug 2016 11:13:25 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Thank you for the settings.
Can you tell me what % number you can see in the Diagnostic tab for Throttle when throttle hold is engaged?
_________________
Spirit System developer
|
|
| Top |
|
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 82 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
