It is currently Tue 12. Nov 2024 23:24:07

All times are UTC + 1 hour





Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 02. Sep 2016 7:38:42 
Offline

Joined: Fri 02. Sep 2016 6:28:46
Posts: 10
Hello Spirit specialist

I got a used Spirit Pro inclusive Wifi module .
Unfortunately, I can not connect with my tablet or PC .
I connected only the Wifimodul and the power supply ( 4.8V battery ) .
If I now in the Android App click Connect I receive the following status :

Connecting

Connected

Disconnected

And then the message " Spirit Unit not found"

What can I do to make a connection ?
Since I have no connection , I can not comment on the firmware .
I have no USB Interface

Thanks for your help
Heli1458


Top
 Profile  
 
PostPosted: Fri 02. Sep 2016 7:58:43 
Offline

Joined: Sat 02. Jan 2016 12:17:50
Posts: 183
Have you connected your phone to the spirit wifi module's wifi network? You'll find it in your phone wifi connection settings usually named something like SPIRIT-Xxxxx where xxxx a unique code for your module.

If you have and it still doesn't work can you open your web browser and go to 192.168.4.1 and see if the page is displayed?


Top
 Profile  
 
PostPosted: Fri 02. Sep 2016 9:42:26 
Offline

Joined: Fri 02. Sep 2016 6:28:46
Posts: 10
jgiannakas wrote:
Have you connected your phone to the spirit wifi module's wifi network? You'll find it in your phone wifi connection settings usually named something like SPIRIT-Xxxxx where xxxx a unique code for your module.

If you have and it still doesn't work can you open your web browser and go to 192.168.4.1 and see if the page is displayed?


My Phone is connected with Spirit Wifi-Link 1B0
I can open 192.168.4.1 Wifi-Link
Wifi Mode is AP
AP SSID is Spirit Wifilink 1B0

If i Spirit Settings enter Wifi-Link can't find the Unit
On top of the Site Connection Problem

Sorry for my bad English


Top
 Profile  
 
PostPosted: Fri 02. Sep 2016 10:05:44 
Offline

Joined: Sat 02. Jan 2016 12:17:50
Posts: 183
No worries. Can you take a picture of how it's connected to the unit? Probably it's not hooked up properly.


Top
 Profile  
 
PostPosted: Fri 02. Sep 2016 10:23:22 
Offline

Joined: Fri 02. Sep 2016 6:28:46
Posts: 10
I have only connect to Power, Power and TX/RX for Wifi-Modul.
there is no Receiver, Sattelite or Servo connected.


Attachments:
IMG_20160902_111652031_HDR.jpg
IMG_20160902_111652031_HDR.jpg [ 1.17 MiB | Viewed 1734 times ]
Top
 Profile  
 
PostPosted: Fri 02. Sep 2016 10:37:22 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
Sure the App is not trying to connect with Bluetooth? The device in the Connection screen should be something like "WIFI [192.168.4.1]".

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
PostPosted: Fri 02. Sep 2016 10:58:34 
Offline

Joined: Fri 02. Sep 2016 6:28:46
Posts: 10
Coco66 wrote:
Sure the App is not trying to connect with Bluetooth? The device in the Connection screen should be something like "WIFI [192.168.4.1]".


Hello Coco66

I have connect with Spirit Wifi-Link 1B0.
There is no bluetooth modul

Thanks


Top
 Profile  
 
PostPosted: Fri 02. Sep 2016 11:00:26 
Offline

Joined: Sat 02. Jan 2016 12:17:50
Posts: 183
What version of the SW is spirit running? Also what's the version of the FW of the wifi module? You can see that in the wifi homepage in your browser.

The unit is plugged in properly.


Top
 Profile  
 
PostPosted: Fri 02. Sep 2016 11:08:04 
Offline

Joined: Fri 02. Sep 2016 6:28:46
Posts: 10
FW of wifi modul is 2.1.0

I have update the wifi modul


Top
 Profile  
 
PostPosted: Fri 02. Sep 2016 13:39:13 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12438
Hello,

is the same power supply (battery) connected also to the unit?
When you power up the unit, can you see initialization procedure - pulsating status LED?
This should take a few seconds and then LED should be ON all the time.

You have to wait until the initialization is complete, then it should just work.
Your connection seems to be correct.

In the Wifi-Link Spirit Settings it should work immediately, if version in the unit is also 2.1.0.
If not, it should still connect and you will see error message "Version mismatch".
Also Android app will tell you if there is a wrong version. So definitively it should connect.

Are you sure that the original owner didn't sold you damaged unit?
Each unit has USB interface, so there is no reason why he didn't sold it as well.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .