It is currently Sat 23. Nov 2024 21:52:50

All times are UTC + 1 hour





Post new topic Reply to topic  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 29. Aug 2016 18:24:48 
Offline

Joined: Thu 17. Mar 2016 5:06:21
Posts: 46
Ok I have bailout set up with my DX8, swash moves upon activation as its supposed to. My next question is in diagnostics tab, my throttle is at 4%. and only goes to 98%.
These settings I had already zeroed out and had them set correctly but now they are off. My question is do I correct this? If so how? and where do I go in the DX8 to do this I cannot remember where I went into the radio to adjust this! :-(

Also what mode of rescue should I be in normal? or Acro? What is the difference? Forgive me but it's been a while since I had originally set this up, and I have forgotten....


Top
 Profile  
 
PostPosted: Mon 29. Aug 2016 19:13:25 
Offline

Joined: Sat 02. Jan 2016 12:17:50
Posts: 183
Rescue Normal always rescues to upright, even if you are inverted. Rescue acro rescues to the nearest orientation, so if you're inverted or close to inverted it will level inverted and punch out.


Top
 Profile  
 
PostPosted: Mon 29. Aug 2016 19:58:54 
Offline

Joined: Thu 08. Oct 2015 14:43:12
Posts: 204
Location: Switzerland
Tab on the wheel on you DX8 / Select Servo Setup / Travel Throttle
Make sure your at Motor OFF position, adjust left 100% likely to 102% for Lower value
Go to full and adjust right 100% likely to 102% for upper Value.
Monitor it in Diagnostics.

_________________
Oxy4max SpiritPro + HW // SOXOS 550, SpiritPro, HW120A V4, 920KV // SOXOS 600, SpiritPro, HW160A, Pyro650 // SOXOS Strike7, SpiritPro, HW160A, Pyro750 // Skywing Spirit Aero // FrSky Horus X10S + Taranis X7 /


Top
 Profile  
 
PostPosted: Mon 29. Aug 2016 20:29:14 
Offline

Joined: Thu 17. Mar 2016 5:06:21
Posts: 46
Great thank you very much! Oh I am running governor will I need to readjust anything?


Top
 Profile  
 
PostPosted: Mon 29. Aug 2016 21:14:55 
Offline

Joined: Sat 02. Jan 2016 12:17:50
Posts: 183
Bladetip wrote:
Great thank you very much! Oh I am running governor will I need to readjust anything?


Yes you would but what exactly depends on your ESC. What brand are you using?


Top
 Profile  
 
PostPosted: Tue 30. Aug 2016 1:32:47 
Offline

Joined: Thu 17. Mar 2016 5:06:21
Posts: 46
It's a Hobby Wing pLatinum Pro 100a


Top
 Profile  
 
PostPosted: Tue 30. Aug 2016 6:53:04 
Offline

Joined: Sat 02. Jan 2016 12:17:50
Posts: 183
Bladetip wrote:
It's a Hobby Wing pLatinum Pro 100a


Ok perfect you'll need to recalibrate the ESC to the new settings.

Disable the governor, power on your TX, put a linear throttle curve 0-100, put throttle stick on high, power model on, wait for the two beeps, put stick to low, wait for the ESC to initialise, unplug everything, reactivate gov and set a flat TC. Done!


Top
 Profile  
 
PostPosted: Tue 30. Aug 2016 7:15:28 
Offline

Joined: Thu 17. Mar 2016 5:06:21
Posts: 46
Great sounds good thanks so much!


Top
 Profile  
 
PostPosted: Tue 30. Aug 2016 8:36:25 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
jgiannakas wrote:
Disable the governor, power on your TX, put a linear throttle curve 0-100, put throttle stick on high, power model on, wait for the two beeps, put stick to low, wait for the ESC to initialise, unplug everything, reactivate gov and set a flat TC. Done!


A perfect write up! Well done! Never seen it explained which such a short paragraph.

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
PostPosted: Tue 30. Aug 2016 9:07:39 
Offline

Joined: Sat 02. Jan 2016 12:17:50
Posts: 183
Coco66 wrote:
jgiannakas wrote:
Disable the governor, power on your TX, put a linear throttle curve 0-100, put throttle stick on high, power model on, wait for the two beeps, put stick to low, wait for the ESC to initialise, unplug everything, reactivate gov and set a flat TC. Done!


A perfect write up! Well done! Never seen it explained which such a short paragraph.


Haha thank you! That's what happens when you type in responses right before going to work and you're in a bit of a rush


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 37 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .