Spirit System
https://www.spirit-system.com/phpBB3/

[SOLVED] Spirit has no pitch function after updates to 2.0.1
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1591		 Page 1 of 1
Author:  berley114 [ Sat 20. Aug 2016 1:51:29 ]
Post subject:  [SOLVED] Spirit has no pitch function after updates to 2.0.1
i have just installed my unused spirit on a new heli, firmware was at v1.0.25. and so i performed the firmware update.
I updated from v1.0.25 to v1.3.2 then on to v2.0.1, Rudder & Cyclic work fine but, i have no pitch function. The spirit diagnostics & Tx monitor indicate the THR & Pitch working fine but the servos do not move.

Thanks for any help.
Kim.
Author:  FrankFuss [ Sat 20. Aug 2016 4:55:06 ]
Post subject:  Re: Spirit has no pitch function after firmware updates to 2
Make sure that your Rudder Gain is positive, if not, pitch output might be fixed if Rescue is enabled.
Author:  berley114 [ Sat 20. Aug 2016 9:48:25 ]
Post subject:  Re: Spirit has no pitch function after firmware updates to 2
Thanks for your reply, bailout not enabled at this time. i will try to flash to a previous firmware or even reset to factory settings if its possible.
Author:  ZeXx86 [ Sat 20. Aug 2016 12:07:00 ]
Post subject:  Re: Spirit has no pitch function after firmware updates to 2
Hello,

Factory reset will be the best. Please try to set Stabi/Function to Disabled. If it will help, then the rescue was engaged all the time.
Author:  berley114 [ Sat 20. Aug 2016 15:17:45 ]
Post subject:  Re: Spirit has no pitch function after firmware updates to 2
Finally ive managed to get it sorted, i flashed back to v1.3.2 which actually made things worse, i had no servo functions at all apart from the servos moving from the sensors, I decided to try a re flash of the v2.0.1, after a re boot everything is now working as it should. Goblin setup is almost complete just the bailout to do. :D

Thanks for help & suggestions.
Author:  jgiannakas [ Sat 20. Aug 2016 17:10:13 ]
Post subject:  Re: Spirit has no pitch function after firmware updates to 2
Why are you not using the latest FW? 2.02 I believe?
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/