Here is it.
Sacha
| Attachments: |
Master MEZON VBar Gov.mode D-E.pdf [1.44 MiB]
Downloaded 127 times |
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Governor With Jeti Mezon https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1494 |
Page 1 of 1 |
| Author: | Rcpassa [ Sun 19. Jun 2016 6:32:33 ] |
| Post subject: | Governor With Jeti Mezon |
Hey everybody, I hope somebody may know the answer to this. I have a Jeti mezon 130 in my 3 bladed Goblin 570 and i use the spirit pro governor. i have FW version 2.0.2 (because I'm using a rex7 receiver). when i spool it up, it will get to roughly 1600-1800 then slow down roughly 200 rpm. it will then start to climb up to normal RPM. This process causes my spool up time to be roughly 35-45 seconds...;any idea what may be going on? Thank you! James |
|
| Author: | velocity90 [ Sun 19. Jun 2016 17:55:05 ] |
| Post subject: | Re: Governor With Jeti Mezon |
Search for the mezon external gov guide by hacker and use those settings, but you will never get good performance. Mezon has a lot of delay so unusable for external gov |
|
| Author: | Rcpassa [ Mon 20. Jun 2016 7:11:49 ] |
| Post subject: | Re: Governor With Jeti Mezon |
Where can i find this guide? I've searched everywhere... |
|
| Author: | sacha [ Mon 20. Jun 2016 22:00:35 ] | ||
| Post subject: | Re: Governor With Jeti Mezon | ||
Here is it. Sacha
|
|||
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|